{"id":5011,"date":"2026-06-10T15:27:51","date_gmt":"2026-06-10T07:27:51","guid":{"rendered":"https:\/\/tigweldingaluminum.com\/?post_type=cxb_products&p=5011"},"modified":"2026-07-27T16:15:44","modified_gmt":"2026-07-27T08:15:44","slug":"engine-motor-mount-bracket","status":"publish","type":"cxb_products","link":"https:\/\/xipin.ywduncha.com\/es\/products\/engine-motor-mount-bracket\/","title":{"rendered":"Soporte de montaje de motor, ensamblaje de montaje de chasis soldado con TIG personalizado"},"content":{"rendered":"

Heavy-duty engine motor mount bracket fabricated with precision TIG welding. 6061 aluminum, vibration-dampening design, custom-fit for any vehicle or industrial application.
2. Why Aluminum for Engine Motor Mount Brackets?
3. Most original equipment manufacturers use cast iron or welded steel for engine motor mount bracket applications. These materials are inexpensive and familiar but carry significant penalties in weight and corrosion resistance.
4. An aluminum engine motor mount bracket offers three distinct advantages:
5. Steel mounting brackets typically weigh between 8 and 12 pounds per side, while comparable aluminum designs often weigh only 3 to 5 pounds. This reduction in vehicle weight can contribute to improved acceleration, handling, braking performance, and overall fuel efficiency.
6. Engine compartments are exposed to moisture, road salt, oil residue, and other contaminants that can accelerate corrosion. Unlike steel, aluminum naturally forms a protective oxide layer that helps resist environmental degradation without requiring additional corrosion protection.
7. Thermal Management:
8. Aluminum offers significantly higher thermal conductivity than steel, allowing heat to dissipate more efficiently throughout the component. Improved heat transfer can help reduce temperatures around rubber isolators, wiring harnesses, and nearby engine bay components.
9. Precision Fabrication Requirements:
10. While aluminum offers substantial performance benefits, it also demands greater precision during manufacturing. Proper material preparation, heat control, and welding techniques are essential to maintain dimensional accuracy and structural integrity in high-load applications.
11. However, aluminum requires expert welding. This is where our tig welding process becomes essential.
12. The TIG Welding Advantage for Motor Mount Brackets:
13. Not all welding processes produce a reliable engine motor mount bracket. The component undergoes constant vibration, temperature swings from -30\u00b0C to +150\u00b0C, and repeated shock loads from engine torque.
14. deposits filler metal quickly but leaves microscopic porosity within the weld pool. For an engine motor mount bracket, that porosity creates crack initiation sites. Over thousands of vibration cycles, these cracks grow until the bracket fails.
15. introduces flux residues that trap moisture against aluminum, accelerating galvanic corrosion. It also produces excessive heat input, warping the bracket and throwing off mounting hole alignment.
16. requires perfect joint fit-up and expensive equipment. It also creates a very narrow, brittle heat-affected zone that can fracture under the dynamic loads an engine motor mount bracket experiences daily.
17. Achieve full fusion without porosity or inclusions
18. Control heat input precisely to prevent warping of the engine motor mount bracket
19. Produce smooth, stack-of-dimes weld beads that distribute stress evenly
20. Every engine motor mount bracket we produce features TIG welds that are both visually consistent and structurally sound. We inspect each weld under magnification to verify complete penetration and absence of defects.
21. Design and Construction of Our Engine Motor Mount Bracket:
22. A properly engineered engine motor mount bracket balances multiple requirements: strength, stiffness, vibration isolation, and precise dimensional accuracy. Our fabrication process addresses each systematically.
23. We fabricate every engine motor mount bracket from 6061-T6 aluminum. This alloy offers:
24. For extreme-duty applications such as diesel engines or competition race cars, we offer 7075-T6 aluminum. This aerospace-grade alloy delivers 70,000 psi yield strength but requires specialized TIG welding techniques that our shop has mastered.
25. Plate Thickness:
26. Depending on engine weight and torque output, we select appropriate material thickness for your engine motor mount bracket:
27. Engine Type
28. Typical Weight
29. Bracket Thickness
30. 4-cylinder
31. 200-350 lbs
32. V6 \/ small V8
33. 350-500 lbs
34. Large V8 \/ diesel
35. 500-800 lbs
36. 5\/16\u2033 (7.9mm)
37. Industrial \/ marine
38. 800+ lbs
39. Geometry and Fitment:
40. Each engine motor mount bracket is custom-designed to your specific vehicle, engine, and chassis configuration. We maintain CAD templates for common swaps including:
41. LS engines into classic cars
42. Honda K-series into vintage chassis
43. Cummins diesel into Ford or GM trucks
44. Electric motor conversions (mounting motor to original engine mounts)
45. For unique applications, we work from your measurements, existing brackets, or 3D scans.
46. When you order an engine motor mount bracket from our shop, you receive a component built specifically for your project, not a generic part adapted to fit.
47. Step 1: Design Consultation
48. Our team gathers key project details, including engine type, chassis specifications, and any special requirements such as turbocharger clearance, accessory drive locations, exhaust routing, or suspension constraints.
49. Aluminum plate is precision-cut using CNC machining, waterjet cutting, or routing equipment. This process produces accurate dimensions and clean edges that are ready for fabrication.
50. Step 3: TIG Welding Assembly
51. Certified welders assemble the structure using AC TIG welding with controlled heat input. Components are carefully positioned and tack welded before full-penetration welds are applied in a sequence designed to minimize distortion.
52. Step 4: Heat Treatment (Optional)
53. For applications requiring maximum mechanical properties, post-weld heat treatment can be performed to restore strength that may be affected during the welding process.
54. Step 5: Final Machining
55. Critical mounting surfaces are machined to ensure flatness and dimensional accuracy. Remaining holes and locating features are completed during this stage to ensure precise fitment.
56. Step 6: Surface Finishing
57. Available finishing options include mill finish, clear anodizing, black anodizing, and powder coating in a wide range of colors to match both functional and aesthetic requirements.
58. Applications Beyond Automotive:.<\/p>\n\n\n\n

\n
<\/div>\n<\/div>\n\n\n\n

Why Aluminum for Engine Motor Mount Brackets?
2. Most original equipment manufacturers use cast iron or welded steel for engine motor mount bracket applications. These materials are inexpensive and familiar but carry significant penalties in weight and corrosion resistance.
3. An aluminum engine motor mount bracket offers three distinct advantages:
4. Steel mounting brackets typically weigh between 8 and 12 pounds per side, while comparable aluminum designs often weigh only 3 to 5 pounds. This reduction in vehicle weight can contribute to improved acceleration, handling, braking performance, and overall fuel efficiency.
5. Engine compartments are exposed to moisture, road salt, oil residue, and other contaminants that can accelerate corrosion. Unlike steel, aluminum naturally forms a protective oxide layer that helps resist environmental degradation without requiring additional corrosion protection.
6. Thermal Management:
7. Aluminum offers significantly higher thermal conductivity than steel, allowing heat to dissipate more efficiently throughout the component. Improved heat transfer can help reduce temperatures around rubber isolators, wiring harnesses, and nearby engine bay components.
8. Precision Fabrication Requirements:
9. While aluminum offers substantial performance benefits, it also demands greater precision during manufacturing. Proper material preparation, heat control, and welding techniques are essential to maintain dimensional accuracy and structural integrity in high-load applications.
10. However, aluminum requires expert welding. This is where our tig welding process becomes essential.
11. The TIG Welding Advantage for Motor Mount Brackets:
12. Not all welding processes produce a reliable engine motor mount bracket. The component undergoes constant vibration, temperature swings from -30\u00b0C to +150\u00b0C, and repeated shock loads from engine torque.<\/h2>\n\n\n\n

Most original equipment manufacturers use cast iron or welded steel for engine motor mount bracket applications. These materials are inexpensive and familiar but carry significant penalties in weight and corrosion resistance.<\/p>\n\n\n\n

An aluminum engine motor mount bracket offers three distinct advantages:<\/p>\n\n\n\n

Reducci\u00f3n de peso:<\/h3>\n\n\n\n

Steel mounting brackets typically weigh between 8 and 12 pounds per side, while comparable aluminum designs often weigh only 3 to 5 pounds. This reduction in vehicle weight can contribute to improved acceleration, handling, braking performance, and overall fuel efficiency.<\/p>\n\n\n\n

Resistencia a la corrosi\u00f3n:<\/h3>\n\n\n\n

Engine compartments are exposed to moisture, road salt, oil residue, and other contaminants that can accelerate corrosion. Unlike steel, aluminum naturally forms a protective oxide layer that helps resist environmental degradation without requiring additional corrosion protection.<\/p>\n\n\n\n

Thermal Management:<\/h3>\n\n\n\n

Aluminum offers significantly higher thermal conductivity than steel, allowing heat to dissipate more efficiently throughout the component. Improved heat transfer can help reduce temperatures around rubber isolators, wiring harnesses, and nearby engine bay components.<\/p>\n\n\n\n

Precision Fabrication Requirements:<\/h3>\n\n\n\n

While aluminum offers substantial performance benefits, it also demands greater precision during manufacturing. Proper material preparation, heat control, and welding techniques are essential to maintain dimensional accuracy and structural integrity in high-load applications.<\/p>\n\n\n\n

However, aluminum requires expert welding. This is where our tig welding process becomes essential.<\/p>\n\n\n\n

\n
\n
\n
\n
\"Soporte<\/figure>\n<\/div>\n\n\n\n
\n
\"Soporte<\/figure>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n\n\n\n
\n
<\/div>\n<\/div>\n\n\n\n

The TIG Welding Advantage for Motor Mount Brackets:<\/h2>\n\n\n\n

Not all welding processes produce a reliable engine motor mount bracket. The component undergoes constant vibration, temperature swings from -30\u00b0C to +150\u00b0C, and repeated shock loads from engine torque.<\/p>\n\n\n\n

Por qu\u00e9 la soldadura TIG supera a otros m\u00e9todos<\/strong>:<\/h4>\n\n\n\n

Soldadura MIG<\/strong> deposits filler metal quickly but leaves microscopic porosity within the weld pool. For an engine motor mount bracket, that porosity creates crack initiation sites. Over thousands of vibration cycles, these cracks grow until the bracket fails.
2. introduces flux residues that trap moisture against aluminum, accelerating galvanic corrosion. It also produces excessive heat input, warping the bracket and throwing off mounting hole alignment.
3. requires perfect joint fit-up and expensive equipment. It also creates a very narrow, brittle heat-affected zone that can fracture under the dynamic loads an engine motor mount bracket experiences daily.
4. Achieve full fusion without porosity or inclusions
5. Control heat input precisely to prevent warping of the engine motor mount bracket
6. Produce smooth, stack-of-dimes weld beads that distribute stress evenly
7. Every engine motor mount bracket we produce features TIG welds that are both visually consistent and structurally sound. We inspect each weld under magnification to verify complete penetration and absence of defects.
8. Design and Construction of Our Engine Motor Mount Bracket:
9. A properly engineered engine motor mount bracket balances multiple requirements: strength, stiffness, vibration isolation, and precise dimensional accuracy. Our fabrication process addresses each systematically.
10. We fabricate every engine motor mount bracket from 6061-T6 aluminum. This alloy offers:
11. For extreme-duty applications such as diesel engines or competition race cars, we offer 7075-T6 aluminum. This aerospace-grade alloy delivers 70,000 psi yield strength but requires specialized TIG welding techniques that our shop has mastered.
12. Plate Thickness:
13. Depending on engine weight and torque output, we select appropriate material thickness for your engine motor mount bracket:
14. Engine Type
15. Typical Weight
16. Bracket Thickness
17. 4-cylinder
18. 200-350 lbs
19. V6 \/ small V8
20. 350-500 lbs
21. Large V8 \/ diesel
22. 500-800 lbs
23. 5\/16\u2033 (7.9mm)
24. Industrial \/ marine
25. 800+ lbs
26. Geometry and Fitment:.<\/p>\n\n\n\n

Soldadura por electrodo revestido<\/strong> introduces flux residues that trap moisture against aluminum, accelerating galvanic corrosion. It also produces excessive heat input, warping the bracket and throwing off mounting hole alignment.<\/p>\n\n\n\n

Soldadura l\u00e1ser<\/strong> requires perfect joint fit-up and expensive equipment. It also creates a very narrow, brittle heat-affected zone that can fracture under the dynamic loads an engine motor mount bracket experiences daily.<\/p>\n\n\n\n

Soldadura TIG<\/strong> resuelve todos estos problemas. Nuestro proceso de soldadura TIG de CA con control de pulso nos permite:<\/p>\n\n\n\n

    \n
  • Achieve full fusion without porosity or inclusions<\/li>\n\n\n\n
  • Control heat input precisely to prevent warping of the engine motor mount bracket<\/li>\n\n\n\n
  • Produce smooth, stack-of-dimes weld beads that distribute stress evenly<\/li>\n\n\n\n
  • Usar varilla de relleno de aluminio 5356 para m\u00e1xima ductilidad y resistencia a la fatiga<\/li>\n<\/ul>\n\n\n\n

    Every engine motor mount bracket we produce features TIG welds that are both visually consistent and structurally sound. We inspect each weld under magnification to verify complete penetration and absence of defects.<\/p>\n\n\n\n

    \n
    <\/div>\n<\/div>\n\n\n\n

    Design and Construction of Our Engine Motor Mount Bracket:<\/h2>\n\n\n\n

    A properly engineered engine motor mount bracket balances multiple requirements: strength, stiffness, vibration isolation, and precise dimensional accuracy. Our fabrication process addresses each systematically.<\/p>\n\n\n\n

    Selecci\u00f3n de materiales:<\/h3>\n\n\n\n

    We fabricate every engine motor mount bracket from 6061-T6 aluminum. This alloy offers:<\/p>\n\n\n\n

      \n
    • L\u00edmite el\u00e1stico: 40,000 psi<\/li>\n\n\n\n
    • Resistencia m\u00e1xima a la tracci\u00f3n: 45,000 psi<\/li>\n\n\n\n
    • Excelente soldabilidad con varilla de relleno 5356<\/li>\n\n\n\n
    • Resistencia superior a la fatiga para aplicaciones din\u00e1micas<\/li>\n<\/ul>\n\n\n\n

      For extreme-duty applications such as diesel engines or competition race cars, we offer 7075-T6 aluminum. This aerospace-grade alloy delivers 70,000 psi yield strength but requires specialized TIG welding techniques that our shop has mastered.<\/p>\n\n\n\n

      Plate Thickness:<\/h3>\n\n\n\n

      Depending on engine weight and torque output, we select appropriate material thickness for your engine motor mount bracket:<\/p>\n\n\n\n

      Engine Type<\/th>Typical Weight<\/th>Bracket Thickness<\/th><\/tr><\/thead>
      4-cylinder<\/td>200-350 lbs<\/td>3\/16\u2033 (4.8 mm)<\/td><\/tr>
      V6 \/ small V8<\/td>350-500 lbs<\/td>1\/4\u2033 (6.4 mm)<\/td><\/tr>
      Large V8 \/ diesel<\/td>500-800 lbs<\/td>5\/16\u2033 (7.9mm)<\/td><\/tr>
      Industrial \/ marine<\/td>800+ lbs<\/td>3\/8\u2033 (9.5 mm)<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n

      Geometry and Fitment:<\/h3>\n\n\n\n

      Cada soporte de montaje del motor est\u00e1 dise\u00f1ado a medida para su veh\u00edculo, motor y configuraci\u00f3n de chasis espec\u00edficos. Mantenemos plantillas CAD para intercambios comunes, incluyendo:<\/p>\n\n\n\n

        \n
      • Motores LS en autos cl\u00e1sicos<\/li>\n\n\n\n
      • Serie K de Honda en chasis vintage<\/li>\n\n\n\n
      • Di\u00e9sel Cummins en camionetas Ford o GM<\/li>\n\n\n\n
      • Conversiones de motor el\u00e9ctrico (montaje del motor en soportes originales)<\/li>\n<\/ul>\n\n\n\n

        Para aplicaciones \u00fanicas, trabajamos a partir de sus medidas, soportes existentes o escaneos 3D.<\/p>\n\n\n\n

        \n
        <\/div>\n<\/div>\n\n\n\n

        Proceso de fabricaci\u00f3n personalizada:<\/h2>\n\n\n\n

        Cuando pide un soporte de montaje del motor en nuestra tienda, recibe un componente construido espec\u00edficamente para su proyecto, no una pieza gen\u00e9rica adaptada.<\/p>\n\n\n\n

        Paso 1: Consulta de dise\u00f1o<\/h3>\n\n\n\n

        Nuestro equipo recopila detalles clave del proyecto, incluyendo tipo de motor, especificaciones del chasis y requisitos especiales como espacio libre para el turbocompresor, ubicaciones de accesorios, recorrido del escape o restricciones de suspensi\u00f3n.<\/p>\n\n\n\n

        Paso 2: Corte del material<\/h3>\n\n\n\n

        La placa de aluminio se corta con precisi\u00f3n mediante mecanizado CNC, corte por chorro de agua o equipo de enrutado. Este proceso produce dimensiones precisas y bordes limpios listos para la fabricaci\u00f3n.<\/p>\n\n\n\n

        Paso 3: Ensamblaje por soldadura TIG<\/h3>\n\n\n\n

        Soldadores certificados ensamblan la estructura mediante soldadura TIG de CA con entrada de calor controlada. Los componentes se colocan y sueldan por puntos antes de aplicar soldaduras de penetraci\u00f3n total en una secuencia dise\u00f1ada para minimizar la distorsi\u00f3n.<\/p>\n\n\n\n

        Paso 4: Tratamiento t\u00e9rmico (opcional)<\/h3>\n\n\n\n

        Para aplicaciones que requieren propiedades mec\u00e1nicas m\u00e1ximas, se puede realizar un tratamiento t\u00e9rmico posterior a la soldadura para restaurar la resistencia que pueda verse afectada durante el proceso de soldadura.<\/p>\n\n\n\n

        Paso 5: Mecanizado final<\/h3>\n\n\n\n

        Las superficies de montaje cr\u00edticas se mecanizan para garantizar planitud y precisi\u00f3n dimensional. Los orificios restantes y las caracter\u00edsticas de ubicaci\u00f3n se completan durante esta etapa para asegurar un ajuste preciso.<\/p>\n\n\n\n

        Paso 6: Acabado superficial<\/h3>\n\n\n\n

        Las opciones de acabado disponibles incluyen acabado de molino, anodizado transparente, anodizado negro y recubrimiento en polvo en una amplia gama de colores para cumplir con requisitos tanto funcionales como est\u00e9ticos.<\/p>\n\n\n\n

        \n
        \n
        \n
        \n
        \"Soporte<\/figure>\n<\/div>\n\n\n\n
        \n
        \"Soporte<\/figure>\n<\/div>\n<\/div>\n<\/div>\n<\/div>\n\n\n\n
        \n
        <\/div>\n<\/div>\n\n\n\n

        Aplicaciones m\u00e1s all\u00e1 de la automoci\u00f3n:<\/h2>\n\n\n\n

        Si bien la mayor\u00eda de los clientes buscan un soporte de montaje de motor para autom\u00f3viles y camiones, nuestras capacidades de soldadura TIG sirven a muchas industrias:<\/p>\n\n\n\n

        Aplicaciones marinas:<\/p>\n\n\n\n

        Los motores marinos dentro de la borda requieren soluciones de montaje altamente resistentes a la corrosi\u00f3n debido a la exposici\u00f3n constante a la humedad y entornos de agua salada. Los dise\u00f1os basados en aluminio se utilizan ampliamente en estas condiciones donde los componentes de acero se degradar\u00edan r\u00e1pidamente.<\/p>\n\n\n\n

        Sistemas de Generadores Industriales:<\/h3>\n\n\n\n

        Los grupos electr\u00f3genos estacionarios dependen de una alineaci\u00f3n precisa del motor y el alternador para una operaci\u00f3n estable a largo plazo. Las estructuras de montaje fabricadas a medida ayudan a mantener la alineaci\u00f3n bajo condiciones continuas de vibraci\u00f3n y carga.<\/p>\n\n\n\n

        Conversiones de Veh\u00edculos El\u00e9ctricos:<\/h3>\n\n\n\n

        Los proyectos de conversi\u00f3n a veh\u00edculos el\u00e9ctricos a menudo requieren sistemas de montaje tipo adaptador para integrar motores el\u00e9ctricos en plataformas de chasis heredadas. Los soportes personalizados est\u00e1n dise\u00f1ados para interactuar con los puntos de montaje del motor existentes mientras soportan nuevas configuraciones del tren motriz.<\/p>\n\n\n\n

        Aviaci\u00f3n Aeron\u00e1utica y Ligera:<\/h3>\n\n\n\n

        Las aplicaciones de aeronaves experimentales y deportivas ligeras se benefician del peso reducido y las estructuras de aluminio de alta resistencia. Los componentes de montaje fabricados y soldados adecuadamente se utilizan donde el ahorro de peso y la fiabilidad son factores de dise\u00f1o cr\u00edticos.<\/p>\n\n\n\n

        \n
        <\/div>\n<\/div>\n\n\n\n

        Preguntas frecuentes:<\/h2>\n\n\n\n

        P: \u00bfPueden soldar un soporte de montaje de motor para un motor di\u00e9sel?<\/strong>
        R: S\u00ed. Los motores di\u00e9sel producen mayor vibraci\u00f3n y par que los motores de gasolina. Utilizamos material m\u00e1s grueso (5\/16\u2033 o 3\/8\u2033) y agregamos refuerzos al dise\u00f1o del soporte de montaje del motor espec\u00edficamente para aplicaciones di\u00e9sel.<\/p>\n\n\n\n

        P: \u00bfProporcionan los aisladores de goma o solo el soporte met\u00e1lico?<\/strong>
        R: Fabricamos solo el soporte de montaje del motor met\u00e1lico. Podemos recomendar aisladores seg\u00fan el peso de su motor y la aplicaci\u00f3n, o podemos dise\u00f1ar el soporte para aceptar montajes OEM o de posventa que usted proporcione.<\/p>\n\n\n\n

        P: \u00bfEs realmente necesaria la soldadura TIG para un soporte de montaje de motor?<\/strong>
        R: Para componentes cr\u00edticos para la seguridad, como un soporte de montaje de motor, s\u00ed. La soldadura TIG produce las soldaduras m\u00e1s fiables e inspeccionables. Un soporte de montaje roto puede dejar caer el motor sobre la cremallera de direcci\u00f3n o el eje, causando p\u00e9rdida de control.<\/p>\n\n\n\n

        P: \u00bfPueden soldar soportes originales agrietados o rotos?<\/strong>
        R: Preferimos fabricar nuevos en lugar de reparar. Los soportes de montaje de motor de aluminio fundido absorben aceite y contaminantes que dificultan una soldadura TIG fiable. Un soporte nuevo fabricado a partir de una placa de 6061 limpia es m\u00e1s resistente que cualquier reparaci\u00f3n.<\/p>\n\n\n\n

        <\/p>","protected":false},"excerpt":{"rendered":"

        El soporte de montaje del motor cuenta con construcci\u00f3n de aluminio mecanizado por CNC, alta resistencia, resistencia a vibraciones y soporte confiable para sistemas de motores automotrices.<\/p>","protected":false},"featured_media":5538,"menu_order":0,"template":"","cxb_product_category":[15],"cxb_product_tag":[7135,7152,7136,7137,7134,7131,4783,7133,93,7138,7123,7161,7157,7126,7144,7159,7142,7162,7155,7127,7145,7141,7125,7121,7122,5308,7150,2257,7143,7147,7140,7149,7158,7124,7156,7160,7132,7148,7163,7130,7146,7139],"class_list":["post-5011","cxb_products","type-cxb_products","status-publish","has-post-thumbnail","hentry","cxb_product_category-tig-welding-aluminum","cxb_product_tag-1-4-inch-aluminum-plate","cxb_product_tag-24-hour-rush-available","cxb_product_tag-3-8-inch-thick-bracket","cxb_product_tag-5-16-inch-aluminum","cxb_product_tag-5086-marine-aluminum","cxb_product_tag-5356-filler-rod-weld","cxb_product_tag-6061-aluminum-bracket","cxb_product_tag-7075-aluminum-motor-mount","cxb_product_tag-ac-tig-welding-aluminum","cxb_product_tag-aerospace-grade-aluminum","cxb_product_tag-aluminum-motor-mount","cxb_product_tag-black-anodized-mount","cxb_product_tag-cad-to-welding-service","cxb_product_tag-chassis-mount-bracket","cxb_product_tag-classic-car-restoration-bracket","cxb_product_tag-clear-anodized-bracket","cxb_product_tag-cummins-bracket","cxb_product_tag-custom-color-coating","cxb_product_tag-custom-engine-mount-fabrication","cxb_product_tag-custom-tig-fabrication","cxb_product_tag-diesel-engine-mount","cxb_product_tag-electric-motor-conversion-mount","cxb_product_tag-engine-cradle-mount","cxb_product_tag-engine-motor-mount-bracket","cxb_product_tag-engine-mount-bracket","cxb_product_tag-engine-support-bracket","cxb_product_tag-experimental-aircraft-mount","cxb_product_tag-full-penetration-tig-weld","cxb_product_tag-hemi-motor-mount","cxb_product_tag-industrial-generator-mount","cxb_product_tag-ls-swap-motor-mount","cxb_product_tag-marine-inboard-engine-mount","cxb_product_tag-mill-finish-aluminum","cxb_product_tag-motor-mount-plate","cxb_product_tag-oem-replacement-direct-fit","cxb_product_tag-powder-coated-engine-bracket","cxb_product_tag-precision-tig-welding-service","cxb_product_tag-race-car-motor-mount","cxb_product_tag-raw-aluminum-ready-for-paint","cxb_product_tag-tig-welded-engine-bracket","cxb_product_tag-truck-engine-bracket","cxb_product_tag-v8-engine-bracket"],"blocksy_meta":[],"_links":{"self":[{"href":"https:\/\/xipin.ywduncha.com\/es\/wp-json\/wp\/v2\/cxb_products\/5011","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/xipin.ywduncha.com\/es\/wp-json\/wp\/v2\/cxb_products"}],"about":[{"href":"https:\/\/xipin.ywduncha.com\/es\/wp-json\/wp\/v2\/types\/cxb_products"}],"version-history":[{"count":5,"href":"https:\/\/xipin.ywduncha.com\/es\/wp-json\/wp\/v2\/cxb_products\/5011\/revisions"}],"predecessor-version":[{"id":8438,"href":"https:\/\/xipin.ywduncha.com\/es\/wp-json\/wp\/v2\/cxb_products\/5011\/revisions\/8438"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/xipin.ywduncha.com\/es\/wp-json\/wp\/v2\/media\/5538"}],"wp:attachment":[{"href":"https:\/\/xipin.ywduncha.com\/es\/wp-json\/wp\/v2\/media?parent=5011"}],"wp:term":[{"taxonomy":"cxb_product_category","embeddable":true,"href":"https:\/\/xipin.ywduncha.com\/es\/wp-json\/wp\/v2\/cxb_product_category?post=5011"},{"taxonomy":"cxb_product_tag","embeddable":true,"href":"https:\/\/xipin.ywduncha.com\/es\/wp-json\/wp\/v2\/cxb_product_tag?post=5011"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}